Drilling Machine / Tapping Machine |
สุทอง แมชชีนเนอรี่ ● เรายินดีให้คำแนะนำโดยทีมผู้เชี่ยวชาญ 02-896-1818 ● สามารถเข้าชมทดลองเครื่องจักรได้ที่โชว์รูม ● บริการหลังการขาย สุดประทับใจ |
|
![]() |
![]() |
High Rigidity Machine Structure : Being manufactured from high rigidity cast iron, the machine structure is computer analyzed foe maximum rigidity user, fast travel and heavy duty macining condutions. |
Machine Specification | Unit | R4530 | R5630 | |
Table size | mm | 500 x 320 | 650 x 410 | |
Max. Table load | kg | 200 | 200 | |
X, Y, Z axis travel | mm | 450 x 300 x 300 | 560 x 400 x 300 | |
Table to spindle nose | mm | 170 ~ 470 | 180 ~ 480 | |
Spindle taper | BT30 | BT30 | ||
Pull stud | MAS403 P30T-1 (45º) | MAS403 P30T-1 (45º) | ||
Spindle motor | Mitsubishi | kw | 5.5 / 3.7 | 5.5 / 3.7 |
FANUC | kw | 3.7 / 2.2 | 3.7 / 2.2 | |
Siemens | kw | 5.6 / 3.7 | 5.5 / 3.7 | |
X drive motor | Mitsubishi | kw | 1.0 | 1.5 |
FANUC | kw | 1.6 | 1.6 | |
Siemens | kw | 2.3 | 2.3 | |
Y drive motor | Mitsubishi | kw | 1.0 | 1.5 |
FANUC | kw | 1.6 | 1.6 | |
Siemens | kw | 2.3 | 2.3 | |
Z drive motor | Mitsubishi | kw | 2.0 | 3.0 |
FANUC | kw | 3.0 | 3.0 | |
Siemens | kw | 3.3 | 3.3 | |
Spindle speeds | rpm | 10000 | 10000 | |
X, Y, Z axis rapid traverse | m/min | 48 / 48 / 60 | 48 / 48 / 60 | |
Tool capacity | 12 | 14 / 20 (OP) | ||
Max. tool weight | kg | 3 | 3 | |
Max. tool length | mm | 200 | 200 | |
ATC time (T-T) | sec | M1.6 /F2.5 | M1.7 /F2.6 | |
Net weight | kg | 2100 | 2600 | |
Floor space | mm | 1200 x 2230 x 2480 | 1590 x 2640 x 2500 |
Controller Specifications | Mitsubishi | FANUC |
Max.controlled axis | 5 | 4 |
Max.simultaneous axis | 4 | 4 |
Standard controlled axis | 3 | 3 |
Program storage length | 512kb | 512kb |
Work piece coordinates | 54 | 54 |
Max. variable number | 700 | 600 |
Tool offset pairs | 400 | 400 |
Convesatiom programming | NAVI | Manual guide 0i |
Monitor | 8.4"TFT LCD | |
Multi-language display | O | O |
ABS servo motor | O | O |
Tool length compensation | O | O |
Tool path compensation | O | O |
On-screen drafting | O | O |
High speed data serve & Ethernet | O | OP |
High speed & high accuracy maching control mode | G05.1 Q1 | |
Interface | RS232/RJ45 | |
Memory card input / output | O | O |
O : Standard / X : None / OP : Option |