SUN MASTER
เครื่องกลึงมือ เครื่องกลึงความเร็วสูง รุ่น AHL-V SERIES
Machine Features:
STANDARD ACCESSORIES:
AHL - 1840V / 1860V / 1880V / 18120V / 2240V / 2260V / 2280V / 22120V
- All models with mechanical clutch. (excluded E.V.S. model)
- All models with auto lubrication system to headstock & external tank for cooling the oil
- All models meet CE. (on request)
- All models with 80mm (3.149") spindle bore, ASA D1-8
- Backplate for 12" chuck
- Dead center MT.5
- Dead center MT.5 with carbide tip
- Spindle center sleeve MT.7
- Level pads......8 pcs
- Tool set & Box
- Operation manual & parts list
- Halogen lamp
- Full length splash guard
OPTIONAL ACCESSORIES：
3-Jaws scroll 12" chuck
4-Jaws independent chuck 12" for 18 or 14" for 21.
5C collet closer attachment
Digital read out system
Chuck Safety Guards
Electrical system for CE
Carriage micro stop set
Drill chuck & arbor
Rotating center MT.5
Taper turning attachment
Steady rest w/ball bearing
Follow rest w/bronze tip
Quick change tool post
- All castings are properly stabilized and stress relieved.
- Bed ways are hardened & ground to min. HRC48-55.
- Extremely low noise level.
- Foot brake pedal provided.
- Wider bed way which give absorbs vibration.
- Y-Δ type spindle motor equipped to make sure smooth start and operation.
- Oil distributor may be adjusted to lubricate bedways, cross slide, or both.
- Automatic and manual forced lubrication pump offered oil to bed ways and cross slide.
LUBRICATION
- Oil sight window for efficient check of oil levelaction.
- Pressure lubrication system in headstock can ensure it's lubricated and cooling when high speed cutting.
- Splash lubrication in feed gearbox & apron.
HEADSTOCK
- Housing is vibration-absorbent, deflection-free.
- Gears are hardened & MAAG or REISHAUER ground.
GEAR BOX
- Universal type allowing a wide range of inch, metric, M.P., D.P. threads without change gears.
- Induction hardened & precision ground gears.
APRON
- R/H or L/H wheel can be available on request.
- Integrated automatic control for longitudinal & cross feeds, forward &reverse feeds.
CARRIAGE & SLIDE
- Anti-Float design backlash eliminator.
- Fitted in cross slide nut.
- Safety clutch at feed shaft.
- One shot lubrication in carriage & top slide.
- Dual dials supply inch system screw.
- Metric dial supply metric system only.
Machine Specifications:
| MODEL | AHL-1840V | AHL-1860V | AHL-1880V | AHL-18120V | AHL-2240V | AHL-2260V | AHL-2280V | AHL-22120V | ||
|---|---|---|---|---|---|---|---|---|---|---|
| Capacity | Height of centers | 230mm (9.055") | 280mm (11.02") | |||||||
| Swing over bed | Ø460mm (18.11") | Ø560mm (22.04") | ||||||||
| Swing in gap | Ø710mm (27.95") | Ø808mm (31.81") | ||||||||
| Swing over cross slide | Ø298mm (11.73") | Ø390mm (15.35") | ||||||||
| Distance between centers | 1000mm (40") | 1500mm (60") | 2000mm (80") | 3000mm (120") | 1000mm (40") | 1500mm (60") | 2000mm (80") | 3000mm (120") | ||
| Width of bed | 345mm (13.58") | |||||||||
| Gap width in front faceplate | 250mm (9.84") | |||||||||
| Headstock and Main Spindle |
Spindle nose, internal taper | D1-8, MT. No.7 | ||||||||
| Spindle center sleeve | MT. No.7 x MT. No.5 | |||||||||
| Spindle bore | Ø80mm (3.149") | |||||||||
| Spindle speed: Gear steps / Range |
4 steps / | |||||||||
| L | 18~55 R.P.M. | |||||||||
| M | 55~180 R.P.M.. | |||||||||
| MH | 180~600 R.P.M. | |||||||||
| H | 600~1800 R.P.M. | |||||||||
| Innitely variable | ||||||||||
| Carriage | Length on bed / Width of carriage | 543mm (21.37") / 542mm (21.33") | ||||||||
| Cross slide travel | 272mm (10.7") | |||||||||
| Top slide travel | 135mm (5.31") | |||||||||
| Whitworth threads: Kinds / Range | 38 Kinds / 2~72 T.P.I. | |||||||||
| Metric threads: Kinds / Range | 40 Kinds / 0.4~14 mm | |||||||||
| D.P. threads: Kinds / Range | 21 Kinds / 8~44 D.P. | |||||||||
| M.P. threads: Kinds / Range | 18 Kinds / 0.3~3.5 M.P. | |||||||||
| Longitudinal feeds | 0.04~1.0 (0.0015"~0.04") | |||||||||
| Cross feeds | 0.02~0.5 (0.00075"~0.02") | |||||||||
| Tailstock | Quill diameter | Ø76mm (3") | ||||||||
| Quill travel | 165 mm (6.5") | |||||||||
| Taper of center | MT. No.5 | |||||||||
| Motor | Main spindle | AC 7.5kW (10HP) , Inverter | AC 9.4kW (12.5HP), Inverter | |||||||
| Forced lubrication for HD. | 1/4 HP | |||||||||
| Coolant pump | 1/8 HP | |||||||||
| Measurement | Weight (Net / Gross) Approx. | 2000kgs 2140kgs |
2200kgs 2360kgs |
2500kgs 2700kgs |
3000kgs 3260kgs |
2150kgs 2290kgs |
2350kgs 2510kgs |
2650kgs 2850kgs |
3150kgs 3410kgs |
|
| Packing size | Length | 2535mm (99.8") | 3035mm (119.5") | 3535mm (139.2") | 4624mm (182") | 2535mm (99.8") | 3035mm (119.5") | 3535mm (139.2") | 4624mm (182") | |
| WidthxHeight | Width 1120mm (44.1") x Height 1900mm (74.8") | |||||||||