SUN MASTER

เครื่องกลึง CNC เครื่องกลึงซีเอ็นซีแบบเตียงแบน รุ่น CNL SERIES

Machine Features:

CNL Series

CNL-1740/1760

STANDARD ACCESSORIES:

  • CNC Controller
  • Tool set and box
  • Rotating center MT.4
  • Machine light
  • Level pads - 6 pcs
  • Operation manual & parts list


  

OPTIONAL ACCESSORIES:

  • 3-Jaw scroll 8" chuck
  • 4-Jaw independent 10" chuck
  • Electric H4 turret
  • Drilling socket MT.1 x Ø20
  • Boring socket Ø6 xØ20~Ø16 x Ø20
  • Quick change tool post
  • Hydraulic hollow chuck 8" with rotary cylinder / bar capacity Ø40 for A1-6 spindle only (Working length increased more 25mm)
  • Chip conveyor & chip bucket cart
  • High pressure coolant pump 3bar 750W
  • Hydraulic tailstock quill
  • Steady rest w / ball bearing
  • Hydraulic P8 turret with boring bar holder Ø20 mm........2 sets boring bar holder Ø25 mm........1 set O.D / facing tool holder........4 sets I.D / facing tool holder........1 set

 

HEADSTOCK (GEARS AND BEARINGS)

  • Headstock bearings and gears are supplied with oil delivered by a pump attached to take on the rear plinth.
  • A distributor within the headstock supplies oil to the drive bearings and gears.

Machine Specifications:

 
MODEL CRL-1440 CRL-1640 CRL-1660
Capacity No. of control axis 2 AXIS
Swing over bed Ø360 mm (14.17") Ø410 mm (16.14") Ø410 mm (16.14")
STD. D1-6 distance between centers 890 mm (35") 890 mm (35") 1400 mm (55")
STD. D1-6Max.
working length
4 way tool post 750 mm (29.52") 750 mm (29.52") 1260 mm (49.61")
Hyd. P8 turret 630 mm (24.80") 630 mm (24.80") 1140 mm (44.88")
Max. working dia. 4 way tool post Ø170 mm (6.7") Ø220 mm (8.66")
Hyd. P8 turret Ø160 mm (6.29") Ø210 mm (8.27")
Width of bed 260 mm (10.236")
Headstock
and Main Spindle
Spindle nose, internal taper STD. D1-6, MT. No.6 OPT. A1-6, MT. No.6
Spindle bore STD. Ø52.5mm (2.066") OPT. Ø51mm (2")
Spindle speed Gear steps Pneumatic change 2 steps / L 25~480 R.P.M.
Range H 481~3000 R.P.M.
Cross Slide (X-axis)
and Carriage (Z-axis)
Cross slide travel ( X-axis ) STD. 205 mm (8.07") 205 mm (8.07") 205 mm (8.07")
Longitudinal travel ( Z-axis ) STD. 815 mm (32.08") 815 mm (32.08") 1325 mm (52.16")
AC servo motor ( X-axis ) 0.75 kW 3.5 N.m
AC servo motor ( Z-axis ) 1.20 kW 7.0 N.m
Dia. of ball screw ( X-axis) Ø20 mm (0.787") P5 C5
Dia. of ball screw ( Z-axis ) Ø32 mm (1.259") P10 C5
Rapid traverse speed ( X-axis ) 7.5 m/min (295.3 ipm)
Rapid traverse speed ( Z-axis ) 10 m/min (393.7 ipm)
Turret Tool station STD. Manual 4 way tool post ☐20 mm OPT. Elec H4 turret ☐20 mm
or
Hydraulic P8 turret ☐20 mm Ø20 mm (0.787")
Size of external turning tool
Boring bar diameter
Tailstock Quill diameter Ø58 mm (2.283")
Quill travel 140 mm (5.5")
Taper of center MT.No.4
Motor Main spindle 5.5kW/7.5kW (30min, rated)
Hydraulic oil pump OPT. 0.75 kW (1 HP) OPT. 1.5kW (2HP)
Forced lubrication for headstock 1 / 4 HP
Coolant pump 1 / 4 HP
Tank Capacity Hydraulic tank OPT. 40 Litre (8.8 gal.)
Coolant tank 50 L (11 gal) 70 L (15.4 gal)
Measurements Weight ( Net / Gross ) Approx. 2,100 kgs / 2,600 kgs 2,150 kgs / 2,650 kgs 2,250 kgs / 2,750 kgs
Packing sizes Length 2470 mm (97.24") 2980 mm (117.32")
Width x Height Width 2030 mm (79.92") x Height 2200 mm (86.61")

Specifications subject to change without notice.